4/26/2020

Tiger z400Pro Satellite,IPTV And Software Update 2020

Tiger z400Pro Satellite, IPTV And Software Update 2020

Tiger z400Pro Satellite,IPTV And Software Update 2020
Tiger z400Pro Software update

Introduction

                 Tiger z400pro, a classic communications receiver c. 1936.

Tiger z400 pro receiver is a type of receiver used as a component of a satellite communication link. This is a broadcast receiver that is used to receive radio broadcasts. Tiger z 400 pro receives parts of the radio spectrum not used for broadcasting, which includes amateur, military, aircraft, marine, and other bands. They are often used with a radio Satellite as part of a two-way radio link for shortwave radio or amateur satellite communication, although they are also used for watching

                  Typically, the tiger receiver is of the superheterodyne(a type of another receiver) type in double, triple or, more rarely, quad conversion. Multiple features RF and IF amplification stages and may have at least one IF stage that is crystal controlled. It normally has a BFO and a product detector for SSB and CW reception. The frequency coverage of receivers of this type is likely in the range of 500 kHz to 30 MHz. Satellite receivers are suited for operation near Usefull transmitting facilities and so must have good internal shielding and effective front-end filtering. These features provide high selectivity and stability. Rejection of unwanted signals will typically be much greater than a consumer-type general coverage or broadcast receiver.
                   
             there is many receiver firmware. all the firmware update daily.AS soon as, digital satellite receiver firmware update as upload ion this blog. Tiger z400 pro software that is updated in last days post first of all here. this is satellite receiver software.

Tiger z400 Pro Software Update

TIGER_Z400 PRO_V2688_LEDF_TG_09042020

Previous Post
Next Post

0 Comments: